Email this Article Email   

CHIPS Articles: Army Sensors Can Now Detect Aircraft Damage As It Happens

Army Sensors Can Now Detect Aircraft Damage As It Happens
By T’Jae Ellis, Army Research Laboratory Public Affairs - November 30, 2017
For the first time ever, a team of researchers successfully developed and tested networked acoustic emission sensors that can detect airframe damage on conceptual composite UH-60 Black Hawk rotorcraft.

Researchers with the U.S. Army Research Laboratory and the U.S Army Aviation and Missile Research, Development and Engineering Center said their discovery opens up possibilities for new onboard features that could immediately alert the flight crew the state of structural damage like matrix cracking and delamination as they occur, giving the crew greater opportunity to take corrective actions before catastrophic failure.

ARL has been studying several possible alternatives to rotorcraft airframe health monitoring. This effort, which began almost two years ago, makes a strong case for integrated real-time damage sensing methodologies on future airframe structures. The sensing method can be used to reliably detect and locate the initiation and growth of damage that may occur during service.

“Future Army airframe structures are required to be lighter, safer and ultra-reliable,” said Dr. Mulugeta Haile, research aerospace engineer. “To achieve these, the Army must adopt a combined strategy of implementing advanced structural design methods, improved structural materials and integrated damage sensing and risk prediction capabilities.”

He said the team turned to acoustic emission tests because other methods such as ultrasonic and radiography require an external energy source in the form of a directed wave.

“The external energy has the undesirable effect of interfering with other systems of the aircraft. In addition, other methods are not as good as AE in detecting early damage,” he said.

Acoustic emission sensing is a passive non-destructive technique for detection of damage in the very early stage and long before the structure experiences catastrophic failure. Unlike other methods, acoustic emission detects damage in real-time (or at the instant the damage is happening). The fact that AE is passive means that it does not require an external energy to detect damage. It relies on the energy that is initiated within the structure, Haile explained.

“The novelty of the current work is that we introduced several new concepts on wave acquisition control and signal processing to recover damage related information in networked acoustic emission sensors,” Haile said. “The Eureka moment was when the sensing network consistently identified and located the initiation and progression of damage during a prolonged fatigue test that lasted over 200,000 cycles. A feat that has never been achieved before.”

Currently, the Army sustains its fleet using phase maintenance paradigm, which is a periodic calendar based practice that requires inspection and maintenance at fixed time intervals. The process is highly inefficient, costly and entails extended downtime. The newly developed sensing network will enable condition based maintenance or maintenance on demand. It has the potential to drastically cut the life cycle cost of Army vehicles. The work also supports the Army’s long term vision of maintenance-free aircrafts.

Read more about this technology on Army.mil.

Related Links:
Army Developing NextGen Surveillance Aircraft
Sensors Key to Preserving Battlefield Edge
Navy Researchers on the Path to Keeping Ice Off Aircraft

Follow Armed with Science on Facebook and Twitter!

The damage sensing network is integrated into a conceptual composite UH-60M Black Hawk rotorcraft. U.S. Army photo
The damage sensing network is integrated into a conceptual composite UH-60M Black Hawk rotorcraft. U.S. Army photo

The approximate cut-out location of the test article and location of group sensors. Sensor groups 1 and 2 are shown. Groups 3 and 4 are on the opposite side. U.S. Army illustration
The approximate cut-out location of the test article and location of group sensors. Sensor groups 1 and 2 are shown. Groups 3 and 4 are on the opposite side. U.S. Army illustration

Acoustic emission sensors used in the distributed network are lightweight broadband piezoelectric crystals. U.S. Army photo
Acoustic emission sensors used in the distributed network are lightweight broadband piezoelectric crystals. U.S. Army photo
Related CHIPS Articles
Related DON CIO News
Related DON CIO Policy

CHIPS is an official U.S. Navy website sponsored by the Department of the Navy (DON) Chief Information Officer, the Department of Defense Enterprise Software Initiative (ESI) and the DON's ESI Software Product Manager Team at Space and Naval Warfare Systems Center Pacific.

Online ISSN 2154-1779; Print ISSN 1047-9988
Hyperlink Disclaimer